[cisco-voip] CMM Module Controller SNMP MIB for up/down state
Erick B.
erickbe at yahoo.com
Fri Jan 28 19:38:03 EST 2005
Update to this. I found the right MIB object I
believe, but it is returning the status of "unknown"
on the Controller T1 ports. When I run the same
against a 3745 or 2650, etc it returns the correct
status.
So looks like the CMM may use something other then the
Interface or IF-MIB and ifOperStatus object. Or theres
a issue with CMM not returning right status.
--- "Erick B." <erickbe at yahoo.com> wrote:
> Hi,
>
> Were using the INTERFACES-MIB and getting a status
> of
> "Unknown" back for the Controller T1 status.
>
> Does anyone know if there is a different MIB to get
> the state (up/down/etc) of Controller T1 interfaces
> in
> this module with 12.3(8)XY IOS?
>
> Thanks, Erick
>
>
>
> __________________________________
> Do you Yahoo!?
> Meet the all-new My Yahoo! - Try it today!
> http://my.yahoo.com
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
__________________________________
Do you Yahoo!?
Yahoo! Mail - Find what you need with new enhanced search.
http://info.mail.yahoo.com/mail_250
More information about the cisco-voip
mailing list