[cisco-voip] RE: ATA integrated with Cisco Call Manager

[Kris Seraphine]

Assuming the partitions and css settings aren't the problem, according to the ATA docs, the ATA can only support 1 port when configured to use G.729.  This is determined in the ATA configuration by the combination of the LBRCodec and Connectmode settings. 
 
I'd check the configuration through the ATA webpage and the Region setting in the assigned callmanager device pool (I'm not sure which takes precedence) and get both ports using G711 and see if they work. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050706/4503fc85/attachment.html