[cisco-voip] DSP Calculator
Lelio Fulgenzi
lelio at uoguelph.ca
Wed Jul 6 16:18:52 EDT 2005
I was thinking the same thing. The documentation states something different as well.
----- Original Message -----
From: Andrew Dignan
To: cisco-voip at puck.nether.net
Sent: Wednesday, July 06, 2005 4:13 PM
Subject: [cisco-voip] DSP Calculator
Anyone have any issues with the new DSP calculator? I have a 3845 with
one PVDM2-64. I have one PRI. In the calculator I put in that I have 24
channels and want to support 4 conferences. It tells me I need "one
PVDM2-48 + one PVDM2-8" to support this. It tells me the config should be
as follows:
-------------------------------------------------
voice-card 0
codec complexity flex
Set of Conferencing/Transcoding commands when used with PVDM2-XX DSPs:
sccp local <local interface>
sccp ccm <call manager IP address>identifier <ccm ID #> version <version #>
sccp
!
sccp ccm group 999
bind interface <local interface>
associate ccm <ccm ID #> priority 1
associate profile <conferenceing profile ID #> register <conference bridge
name>
!
dspfarm profile <conferencing profile ID #> conference
maximum sessions 4
associate application SCCP
---------------------------------------------------
However, under the dspfarm profile it only gives me the option for 1 or 2
sessions (as opposed to 4). Any idear's?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050706/d8229803/attachment.html
More information about the cisco-voip
mailing list