[cisco-voip] Bat-phone functionality for IP phones?

[Lelio Fulgenzi]

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080232b9f.shtml

This gives you the basic idea behind a PLAR with CallManager. You might have to massage it a bit to fit your particular dial-plan design.
  ----- Original Message ----- 
  From: David 
  To: cisco-voip at puck.nether.net 
  Sent: Friday, July 08, 2005 2:03 PM
  Subject: [cisco-voip] Bat-phone functionality for IP phones?


  Hello folks,

  Does anyone know if it's possible to configure an IP phone (7902 in
  this case) to dial a particular number when it goes off-hook?  I know
  you can do this with analog phones via a PLAR on a Voice Gateways
  voice-port, but is there equivalent functionality in the IP world?

  Thanks!

  -David

  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050708/f6552a51/attachment.html