[cisco-voip] ATA integrated with Cisco Call Manager

[Brain Whistler]

But in my case second port never work, even when first
port is not in use.

Brain

--- Boda György <gyorgy.boda at nextiraone.hu> wrote:

> Configure G.711 on both the ATA and in CCM's Region
> page.
> 
> With G.729 only one port is available at the same
> time.
> 
> gyorgy
> 
> -----Original Message-----
> From: Brain Whistler
> [mailto:brainwhistler at yahoo.com] 
> Sent: 2005. július 6. 14:24
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] ATA integrated with Cisco Call
> Manager
> 
> Hi,
> 
> I have integrated ATA 186 with Cisco Call Manager
> using SCCP, both of its port are registered and have
> seperate DN number. The problem i am facing is that
> I
> can only receive and send calls through only one
> port,
> its second port never worked, although I can see it
> is
> registered to call Manager. 
> 
> Does anyone have idea what's wrong with it.
> 
> Thanks
> Brain
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> http://mail.yahoo.com 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
> 



		
____________________________________________________
Sell on Yahoo! Auctions – no fees. Bid on great items.  
http://auctions.yahoo.com/