[cisco-voip] ATA integrated with Cisco Call Manager

[Boda György]

Configure G.711 on both the ATA and in CCM's Region page.

With G.729 only one port is available at the same time.

gyorgy

-----Original Message-----
From: Brain Whistler [mailto:brainwhistler at yahoo.com] 
Sent: 2005. július 6. 14:24
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] ATA integrated with Cisco Call Manager

Hi,

I have integrated ATA 186 with Cisco Call Manager
using SCCP, both of its port are registered and have
seperate DN number. The problem i am facing is that I
can only receive and send calls through only one port,
its second port never worked, although I can see it is
registered to call Manager. 

Does anyone have idea what's wrong with it.

Thanks
Brain

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip