[cisco-voip] Incoming CCM calls
Teodor Dobrev
tdobrev at telelink.bg
Tue Jul 12 09:57:13 EDT 2005
Hi All,
Another question for today:-)
So I have this IP network with CCM and remote router 2821 with FXS ports
and analog phones attached on these ports.
I have configured partition on the CCM 82.[1-9]!# wich sends me to the
2821 Gateway when I dial 82....
So when I dial 82100 I have one of the analog phones ringing and
everything working right.
But when I try to dial in the other way,from the Analog phone to the IP
Phone registered in the CCM the call fails
I get :
VoiceLab-2821#csim start 92002
csim: called number = 92002, loop count = 1 ping count = 0
csim err csimDisconnected recvd DISC cid(41)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0
The configuration of the router dial peer is:
dial-peer voice 82 voip
translation-profile outgoing TOVoiceLab
destination-pattern 9T
session target ipv4:10.1.1.10
dtmf-relay rtp-nte
The CCM IP Address is 10.1.1.10
So do I need to configure something more in the CCM or what?
Any help I'll appreciate
BR,
Teo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050712/5f40415f/attachment.html
More information about the cisco-voip
mailing list