[cisco-voip] Incoming CCM calls
Kevin Thorngren
kthorngr at cisco.com
Tue Jul 12 10:12:17 EDT 2005
Hi Teodor,
First verify that the Calling Search Space for the H.323 GW contains a
partition that can call 92002.
Kevin
On Jul 12, 2005, at 9:57 AM, Teodor Dobrev wrote:
> Hi All,
> Another question for todayJ
> So I have this IP network with CCM and remote router 2821 with FXS
> ports and analog phones attached on these ports.
> I have configured partition on the CCM 82.[1-9]!# wich sends me to the
> 2821 Gateway when I dial 82….
> So when I dial 82100 I have one of the analog phones ringing and
> everything working right.
> But when I try to dial in the other way,from the Analog phone to the
> IP Phone registered in the CCM the call fails
> I get :
> VoiceLab-2821#csim start 92002
> csim: called number = 92002, loop count = 1 ping count = 0
>
> csim err csimDisconnected recvd DISC cid(41)
> csim: loop = 1, failed = 1
> csim: call attempted = 1, setup failed = 1, tone failed = 0
>
>
>
> The configuration of the router dial peer is:
> dial-peer voice 82 voip
> translation-profile outgoing TOVoiceLab
> destination-pattern 9T
> session target ipv4:10.1.1.10
> dtmf-relay rtp-nte
>
>
> The CCM IP Address is 10.1.1.10
>
> So do I need to configure something more in the CCM or what?
> Any help I’ll appreciate
>
>
>
> BR,
> Teo
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 3928 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20050712/4145d99a/attachment.bin
More information about the cisco-voip
mailing list