[cisco-voip] Incoming CCM calls

[Marc Hering]

You dont have a dial peer to handle the 100 extension....you told CCM to
send all calls that start 82 to the router, but the router doesn't know
how to handle them...

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Teodor Dobrev
Sent: Tuesday, July 12, 2005 9:57 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Incoming CCM calls



Hi All,

Another question for today:-)

So I have this IP network with CCM and remote router 2821 with FXS ports
and analog phones attached on these ports.

I have configured partition on the CCM 82.[1-9]!# wich sends me to the
2821 Gateway when I dial 82....

So when I dial 82100 I have one of the analog phones ringing and
everything working right.

But when I try to dial in the other way,from the Analog phone to the IP
Phone registered in the CCM the call fails

I get :

VoiceLab-2821#csim start 92002

csim: called number = 92002, loop count = 1 ping count = 0

 

csim err csimDisconnected recvd DISC cid(41)

csim: loop = 1, failed = 1

csim: call attempted = 1, setup failed = 1, tone failed = 0

 

 

 

The configuration of the router dial peer is:

dial-peer voice 82 voip

 translation-profile outgoing TOVoiceLab

 destination-pattern 9T

 session target ipv4:10.1.1.10

 dtmf-relay rtp-nte

 

 

The CCM IP Address is 10.1.1.10

 

So do I need to configure something more in the CCM or what?

Any help I'll appreciate

 

 

 

BR,

Teo

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050712/1b464582/attachment-0001.html