[cisco-voip] How do I share a line in two locations?
Lelio Fulgenzi
lelio at uoguelph.ca
Fri Jul 15 10:26:58 EDT 2005
It may take a bit of a redesign of your dialplan, but here's what I would do:
Create AcmeDevice_MAC_CSS and in that create your route patterns to access the PSTN (including 911 and 9.911) and send them out the MAC gateways. This would include all PSTN route patterns.
Create AcmeDevice_SAL_CSS and in that create your route patterns to access the PSTN (including 911 and 9.911) and send them out the SAL gateways. This would include all PSTN route patterns.
Create a few partitions which have route patterns which block certain PSTN patterns:
a.. Acme_PSTN_OnNetOnly_PT : this would block all PSTN access except 911 and 9.911
b.. Acme_PSTN_LocalCalls_PT: this would block everything except local calling, perhaps directory assistance too.
c.. Acme_PSTN_LongDist_PT: this would block international calling
d.. Acme_PSTN_Unlimited_PT: this would block only restricted calling such as 1-900 numbers
e.. Acme_PSTN_Unrestricted_PT: in actuality, you don't need this partition! if you want to assign unrestricted access, just don't include the PSTN access partitions.
Give the MAC phone the AcmeMAC_CSS, give the SAL phone the AcmeSAL_CSS and give the shared line the CSS that it needs to access your onnet resources....just make sure to put the appropriate PSTN partition in that CSS so that you are blocking the shared line from accessing what it shouldnt. This way, when the calls to the PSTN are made, they go out the appropriate gateway.
Now, that all being said, you can make the PSTN partitions and complicated or as simple as you'd like. Working here, I know that as soon as I put any restrictions on something I'll be asked to make an exception for somebody high up.... ;) So I built our dial plan accordingly to do that. Here's a look at what my device calling search space looks like and what some of my PSTN blocking partitions look like (see attachment).
I'm more than welcome to discuss this live - email doesn't do it justice. ;)
----- Original Message -----
From: Voll, Scott
To: Lelio Fulgenzi ; cisco-voip at puck.nether.net
Cc: Ryan Ratliff
Sent: Friday, July 15, 2005 9:46 AM
Subject: RE: [cisco-voip] How do I share a line in two locations?
That is what I'm looking to do.
But I don't think I have a good grasp of what you're saying I need to do. Can you expand.
Remote location (PRI VGW) extension 5925
Central site (VGW 3 PRIs) extension 5925
Extension 5925 comes in on the remote location. Lets call the partition "MAC" we will call the central site "SAL".
Central site 5925 is in the SAL DP and remote site is in the MAC DP. Same with location, etc. (main phone config page)
Call comes in at the remote site and rings both phones with extension 5925 and both the central and remote site.
Problem.
Because it's a shared line appearance both phones are using the MAC partition, MAC CSS (line config page).
Question
How do I get the SAL phone to use the Central Site's PRIs for the 9.@ and the remote site's PRI's for the remote MAC Phone?
Thanks
Scott
------------------------------------------------------------------------------
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Thursday, July 14, 2005 4:48 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] How do I share a line in two locations?
Hi Scott. Our two cents are worth about 1.62 of yours - but we do have Tim Horton's coffee. ;)
Anyways, I haven't used locations for the use of codecs etc and I'm not sure if you can have the same DN/partition on different phones in different locations, however, one of my colleages did something similar and had it working.
What I gather from what you are looking for is the ability for people to dial out the appropriate PRI when at the different physical locations. If that's what you are looking for, then I think the line/device approach is what you need. We did this for that reason and also to prepare for extension mobility. We gave the phone access to all PSTN route patterns and then restricted the line by putting a partition in the line's css that blocked particular route patterns. This way here, you could put the shared line at each location in the same partition and they would work in unison, both ringing at the same time. When the person dials 9.@ it will go out the appropriate gateway.
Is this what you were looking for or did I read your message incorrectly?
----- -----
Lelio Fulgenzi, B.A. lelio at uoguelph.ca.eh
Network Analyst (CCS)
University of Guelph FAX:(519) 767-1060 JNHN
Guelph, Ontario N1G 2W1 TEL:(519) 824-4120 x56354
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
mob lawyer: your people insulted my brother.
dr. house: what? romano in the parmesan cheese shaker again?
----- Original Message -----
From: Voll, Scott
To: cisco-voip at puck.nether.net
Sent: Thursday, July 14, 2005 6:36 PM
Subject: [cisco-voip] How do I share a line in two locations?
I have two sites that are in different calling areas but have users that are
based out of both sites. Remote site has a Single PRI and the central site
has 3 PRIs. They want there extension at each location (shared line
appearance). Do I put both extensions in the location (partition) that the
extension is supposed to be at? Then all calls from the central site will
go out the WAN to the remote site to dial out? How is the best way to work
this? I already have toll bypass working so it really only comes down to
long distance calls. What is everyone's two cents worth?
Scott
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050715/0317c9cd/attachment-0001.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PSTN access only for distrib.zip
Type: application/x-zip-compressed
Size: 324906 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20050715/0317c9cd/PSTNaccessonlyfordistrib-0001.zip
More information about the cisco-voip
mailing list