[cisco-voip] VT Advantage & Polycom videoconferencing

[Oliver Rebollido]

We're using this setup as well.  We have the Tandberg 1000 MXP for Cisco
CallManager (the SCCP version) with our VT Advantages.  We also could
call into our Tandberg 6000 units using H.323.  Of course, this is all
video calls (2 way call), not video conferences because we do not have a
hardware conference bridge. 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike Armstrong
Sent: Tuesday, July 19, 2005 9:02 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] VT Advantage & Polycom videoconferencing

Anybody using this?  We set up 4 phones with the video kits to
experiment with.  They work well, and are very cool, but I have this
"all dressed up with no place to go" feeling.  We'd really like to be
able to call a Polycom conference bridge or gatekeeper, though, rather
than just another phone. 
About all I know about H.323 is how to spell it, which looks like a real
problem as well, although we're using a 3640 (soon to be a 2821) as an
H.323 gateway to a Telco PRI, so we may be closer than I think to being
able to do this.  Any high-level conceptual advice and/or experience
would be appreciated.

Mike Armstrong
UF/IFAS CREC
Lake Alfred, FL 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
--------------------------------------------------------

IRS Circular 230  Disclosure:  To ensure compliance with requirements imposed by the IRS, we inform you that any U.S. federal tax advice in this communication (including attachments) is not intended or written by Fenwick & West LLP to be used, and cannot be used, for the purpose of (i) avoiding penalties under the Internal Revenue Code or (ii) promoting, marketing, or recommending to another party any transaction or matter addressed herein.
--------------------------------------------------------

ATTENTION:
The information contained in this message may be legally privileged and confidential.  It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited.
 
If you have received this message in error, please immediately notify the sender and/or Fenwick & West LLP by telephone at (650) 988-8500 and delete or destroy any copy of this message.