[cisco-voip] Reverse translation pattern

[Marc Hering]

I usually just set the externam phone number mask at the DN
level...overrides everythign else :) 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Friday, July 22, 2005 1:17 PM
To: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Reverse translation pattern

Can't I do this via A Translation Pattern?

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Friday, July 22, 2005 10:08 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Reverse translation pattern

I'm bringing on a site that will have a main number then extensions. 

When dialing out I want the main number to show for all phones.  

I'm doing toll bypass so I have about 150 prefix dial patterns and all
of them are using the "use Calling Party's External Phone Number Mask"
because the phones at other sites have DID's.  

I really don't want to duplicate all the Route patterns.  

Is there a way to say if extension = 12xx then make the phone mask
5035551212?

I would like the phone to have the extension so the end user knows there
extension and I need space on the line label for names.

Thanks

Scott


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip