[cisco-voip] Reverse translation pattern
Ryan Ratliff
rratliff at cisco.com
Fri Jul 22 13:23:03 EDT 2005
You can modify the calling party number on a translation pattern yes
but I don't think it's the best way to achieve this.
If you already have all your route patterns to set to use the external
phone number mask then why not just configure it for all of the 12XX
phones? BAT may even be able to do this for you.
-Ryan
On Jul 22, 2005, at 1:17 PM, Voll, Scott wrote:
Can't I do this via A Translation Pattern?
Scott
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Friday, July 22, 2005 10:08 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Reverse translation pattern
I'm bringing on a site that will have a main number then extensions.
When dialing out I want the main number to show for all phones.
I'm doing toll bypass so I have about 150 prefix dial patterns and all
of them are using the "use Calling Party's External Phone Number Mask"
because the phones at other sites have DID's.
I really don't want to duplicate all the Route patterns.
Is there a way to say if extension = 12xx then make the phone mask
5035551212?
I would like the phone to have the extension so the end user knows there
extension and I need space on the line label for names.
Thanks
Scott
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list