[cisco-voip] Unity Transfer
Nick Marus
nmarus at gmail.com
Fri Jul 29 16:07:31 EDT 2005
I have a setup like follows
Translation Pattern -> CTI Route Point w/ Forward all to VM -> Unity
CallHandler
With this setup, when a call gets to the callhandler that I have setup for
doing a transfer back to an operator during the day and taking a message at
night, it will never perform the transfer and always takes teh message.
Internally if i dial the voicemail pilot number and enter the extension of
the call handler it then works? But from the outside using hte translation
pattern and cti route point it does not.
Any ideas?
--
Nick Marus
nmarus at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050729/48054116/attachment.html
More information about the cisco-voip
mailing list