[cisco-voip] 7200 NON VXR + PA-VXC-T1

[Diego Costa]

Excellent Thanks to all. I have another question, Did you recommend a c2800
with an HDV?.

Regards,
Diego.

-----Mensaje original-----
De: Dave Temkin [mailto:dave at ordinaryworld.com] 
Enviado el: Lunes, 06 de Junio de 2005 12:41 a.m.
Para: Walenta, Phil
CC: Diego Costa; Cisco-Voip
Asunto: RE: [cisco-voip] 7200 NON VXR + PA-VXC-T1

Completely agreed.  One of my favorite, still unsolved bugs, is where 7200
DSP resources get completely locked up on PA-VXB and PA-VXC cards and only
a reload will unlock them - and sometimes it actually takes a power cycle
vs. just a warm reload to actually fix it.

Happens in various releases of 12.2, 12.3, and 12.3T code.  UGLY.  And
that's far from the only issue I've seen.



On Sun, 5 Jun 2005, Walenta, Phil wrote:

> I'd recommend against using a 7200 as a voice gateway.  I've had several
> interesting experiences with them, none that I'd call good.
>
> ________________________________
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Diego Costa
> Sent: Friday, June 03, 2005 2:12 PM
> To: Cisco-Voip
> Subject: [cisco-voip] 7200 NON VXR + PA-VXC-T1
>
>
>
> Hi List!
>
>
>
> I have a question, anyone are using or used a Cisco 7200 NON VXR with a
> PA-VXC-T1??? We are thinking to use it, but we didn't find information
> about the experience with this equipment.
>
>
>
> Regards,
>
> Diego.
>
>