[cisco-voip] application command on voip dial peer

[Geoffrey Cauchi]

Hi

 

Is it possible to configure the ivr feature on a voip dial
peer, on a cisco router?

 

What I would like to setup is the following:

 

dial-peer voice 310 voip

 description Voip Phone

 destination-pattern 456

 voice-class codec 1

 session target ipv4:192.168.245.5

 

Whenever a user will be calling this number, i.e. 456, he
will be prompted by an ivr Prompt.  Is that possible?

BTW, the call will be originated from an ip phone not pots.

 

Thanks

Geoff

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050607/3e902e85/attachment.html