[cisco-voip] GK and Terminal and CCM in the different local zones

[Mladen Milanovic (mmilanovic)]

Hi, 
I have a little problem :-). I have GK with a two local zone: 

zone local TEST1 test.co.yu x.x.x.x 
zone local TEST2 

in the zone TEST2 I put a CCM cluster and in the zone TEST1 I put a
ATA(H.323). 

ATA is registered as a terminal, and CCM as a GWs. Problem is: I can't make
calls between ATA and CCM. 
Also, when I put another CCM cluster in the different zoe I can make calls
between two clusters in the different zones. 


This is a config. What did I miss: 

gatekeeper 
zone local MDS mds.co.yu 192.168.60.240 
zone local NBS mds.co.yu 
zone prefix NBS 7... gw-priority 10 TRUNK-TO-MDS_2 
zone prefix NBS 7... gw-priority 9 TRUNK-TO-MDS_1 
gw-type-prefix 1#* default-technology 
lrq reject-unknown-prefix 
bandwidth interzone zone NBS 128 
no shutdown 

Mladen 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050609/673ff41d/attachment.html