[cisco-voip] Strange problem with DL320

[Voll, Scott]

I had a similar issue with my 7825 and CRS.  I reset the Bois/ Raid and
it loaded fine.  I was in the process of my CM 4.1 and CRS 3.5 upgrade
so I was sweating it a little.

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Brian Feeny
Sent: Friday, June 10, 2005 3:53 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Strange problem with DL320

I have a pair of DL320's I am installing CallManger on.  These are the 
original DL320's (800mhz).

I installed CM just fine on the one server.

The other server locks up when you put the hardware detection CD in 
(version 2.4), and after the initial screen,
when it gets to the black and white Cisco logo screen, that's where it 
locks up.

I swapped out the CPU, memory, management card, and even motherboard, 
and it still locked up.  When I swapped
the hard drives over from the "good" server, it worked (would continue 
with the install).

What's wierd is these are the exact same hard drives (part 242008-001 I 
believe).  I can install and use windows
just fine on these hard drives (using the windows cd's).  But for some 
reason the hardware detection cd does not
like them.  Does anyone have any ideas what this could be?  Could the 
hard drives have something on them
making hardware detection crash?

Brian

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip