[cisco-voip] Strange problem with DL320

[Brian Feeny]

I think I got this fixed.  The drives were formatted FAT (or FAT32) and 
not sure why, but after formatting them to NTFS, the
install (hardware detection) was fine.

Brian

On Jun 10, 2005, at 7:15 PM, Voll, Scott wrote:

> I had a similar issue with my 7825 and CRS.  I reset the Bois/ Raid and
> it loaded fine.  I was in the process of my CM 4.1 and CRS 3.5 upgrade
> so I was sweating it a little.
>
> Scott
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Brian Feeny
> Sent: Friday, June 10, 2005 3:53 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Strange problem with DL320
>
> I have a pair of DL320's I am installing CallManger on.  These are the
> original DL320's (800mhz).
>
> I installed CM just fine on the one server.
>
> The other server locks up when you put the hardware detection CD in
> (version 2.4), and after the initial screen,
> when it gets to the black and white Cisco logo screen, that's where it
> locks up.
>
> I swapped out the CPU, memory, management card, and even motherboard,
> and it still locked up.  When I swapped
> the hard drives over from the "good" server, it worked (would continue
> with the install).
>
> What's wierd is these are the exact same hard drives (part 242008-001 I
> believe).  I can install and use windows
> just fine on these hard drives (using the windows cd's).  But for some
> reason the hardware detection cd does not
> like them.  Does anyone have any ideas what this could be?  Could the
> hard drives have something on them
> making hardware detection crash?
>
> Brian
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip