**SPAM** RE: [cisco-voip] Quick Part Number Check

[MIHI]

Anthony,

3640 doesn't support NM-HDV2, use the "classic" NM-HDV, see
http://cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008
00e73f6.shtml#platformmatrix

Marton 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony Mendoza
Sent: Tuesday, June 14, 2005 4:55 PM
To: Wes Sisk; Voll, Scott; cisco VoIP List
Subject: **SPAM** RE: [cisco-voip] Quick Part Number Check

Yup, need voice..  The part Scott gave is the correct part for that one,
right?

-Anthony 

> -----Original Message-----
> From: Wes Sisk [mailto:wsisk at cisco.com]
> Sent: Tuesday, June 14, 2005 7:55 AM
> To: Voll, Scott; Anthony Mendoza; cisco VoIP List
> Subject: RE: [cisco-voip] Quick Part Number Check
> 
> depends if you want voice or not.
> 
> /Wes
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Voll, Scott
> Sent: Tuesday, June 14, 2005 10:55 AM
> To: Anthony Mendoza; cisco VoIP List
> Subject: RE: [cisco-voip] Quick Part Number Check
> 
> 
> The module is NM-HDV2 and the PRI card is something like VWIC-1MFT-t1.
> 
> Scott
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony 
> Mendoza
> Sent: Tuesday, June 14, 2005 7:17 AM
> To: cisco VoIP List
> Subject: [cisco-voip] Quick Part Number Check
> 
> What's the part number for a PRI interface card for a 3640 router?
> 
> Is it the standard "WIC 1DSU T1" used for T1 interfaces or is it a 
> separate card?
> 
> Thanks in advance,
> --
> Anthony Mendoza