**SPAM** RE: [cisco-voip] Quick Part Number Check

[Anthony Mendoza]

Thanks for the catch!  I've actually got a 2651 that has the NM-HD-2V so
maybe I'll use that instead.

-Anthony 

> -----Original Message-----
> From: MIHI [mailto:mihi at ludens.elte.hu] 
> Sent: Tuesday, June 14, 2005 8:40 AM
> To: Anthony Mendoza; 'Wes Sisk'; 'Voll, Scott'; 'cisco VoIP List'
> Subject: RE: **SPAM** RE: [cisco-voip] Quick Part Number Check
> 
> Anthony,
> 
> 3640 doesn't support NM-HDV2, use the "classic" NM-HDV, see
> http://cisco.com/en/US/products/hw/routers/ps259/products_tech
> _note09186a008
> 00e73f6.shtml#platformmatrix
> 
> Marton 
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of 
> Anthony Mendoza
> Sent: Tuesday, June 14, 2005 4:55 PM
> To: Wes Sisk; Voll, Scott; cisco VoIP List
> Subject: **SPAM** RE: [cisco-voip] Quick Part Number Check
> 
> Yup, need voice..  The part Scott gave is the correct part 
> for that one,
> right?
> 
> -Anthony 
> 
> > -----Original Message-----
> > From: Wes Sisk [mailto:wsisk at cisco.com]
> > Sent: Tuesday, June 14, 2005 7:55 AM
> > To: Voll, Scott; Anthony Mendoza; cisco VoIP List
> > Subject: RE: [cisco-voip] Quick Part Number Check
> > 
> > depends if you want voice or not.
> > 
> > /Wes
> > 
> > -----Original Message-----
> > From: cisco-voip-bounces at puck.nether.net
> > [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Voll, Scott
> > Sent: Tuesday, June 14, 2005 10:55 AM
> > To: Anthony Mendoza; cisco VoIP List
> > Subject: RE: [cisco-voip] Quick Part Number Check
> > 
> > 
> > The module is NM-HDV2 and the PRI card is something like 
> VWIC-1MFT-t1.
> > 
> > Scott
> > 
> > -----Original Message-----
> > From: cisco-voip-bounces at puck.nether.net
> > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony 
> > Mendoza
> > Sent: Tuesday, June 14, 2005 7:17 AM
> > To: cisco VoIP List
> > Subject: [cisco-voip] Quick Part Number Check
> > 
> > What's the part number for a PRI interface card for a 3640 router?
> > 
> > Is it the standard "WIC 1DSU T1" used for T1 interfaces or is it a 
> > separate card?
> > 
> > Thanks in advance,
> > --
> > Anthony Mendoza
> 
> 


CONFIDENTIALITY NOTICE: The information contained in this message and
or attachments is intended only for the person or entity to which it is
addressed and may contain confidential and/or privileged material. Any
review, retransmission, dissemination, copying, or other use of this
information by persons or entities other than the intended recipient is
prohibited. If you received this e-mail or its attachments in error, 
please contact the sender and delete the material from any system and 
destroy any copies.