[cisco-voip] Question on PRI Gateway

[Tim Frazee]

You will need at least layer 2 to register.

I normally plug in a loopback plug for staging.



Timothy Frazee
Enterprise Engineer
AOS Global Solutions
 
Cisco IP Phone: 636.680.1065
Cellular Phone: 314.753.7506
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony Mendoza
Sent: Sunday, June 19, 2005 1:45 PM
To: Cisco VoIP
Subject: [cisco-voip] Question on PRI Gateway

I've got my 3640 properly configured (or so I believe), but it isn't
showing up as registered on my CCM (4.x)..  To me it appears as though
the gateway is properly configured as it shows as being "registered" to
the primary CCM (my subscriber).

Here's what I see on the gateway:
 
rwc-faxgw-149-59#sho ccm-manager
MGCP Domain Name: rwc-faxgw-149-59.niku.com
Priority        Status                   Host
============================================================
Primary         Registered               10.150.4.11
First Backup    Backup Ready             10.150.4.12
Second Backup   Backup Ready             10.150.0.13
 
Current active Call Manager:    10.150.4.11
Backhaul/Redundant link port:   2428
Failover Interval:              30 seconds
Keepalive Interval:             15 seconds
Last keepalive sent:            13:41:25 PDT Jun 19 2005 (elapsed time:
00:00:07)
Last MGCP traffic time:         13:41:25 PDT Jun 19 2005 (elapsed time:
00:00:07)
Last failover time:             None
Last switchback time:           None
Switchback mode:                Graceful
MGCP Fallback mode:             Not Selected
Last MGCP Fallback start time:  None
Last MGCP Fallback end time:    None
 
Configuration Error History:
FAX mode: cisco

And

rwc-faxgw-149-59#show mgcp
MGCP Admin State ACTIVE, Oper State ACTIVE - Cause Code NONE
MGCP call-agent: 10.150.4.11 Initial protocol service is MGCP 0.1
MGCP block-newcalls DISABLED
MGCP send SGCP RSIP: forced/restart/graceful/disconnected DISABLED
MGCP quarantine mode discard/step
MGCP quarantine of persistent events is ENABLED
MGCP dtmf-relay voip codec all mode out-of-band
MGCP dtmf-relay for VoAAL2 disabled for all codec types
MGCP voip modem passthrough disabled
MGCP voaal2 modem passthrough disabled
MGCP voip modem relay: Disabled.
MGCP TSE payload: 100
MGCP T.38 Named Signalling Event (NSE) response timer: 200
MGCP Network (IP/AAL2) Continuity Test timer: 200
MGCP 'RTP stream loss' timer disabled
MGCP request timeout 500
MGCP maximum exponential request timeout 4000
MGCP rtp unreachable timeout 1000 action notify
MGCP gateway port: 2427, MGCP maximum waiting delay 3000
MGCP restart delay 0, MGCP vad DISABLED
MGCP rtrcac DISABLED
MGCP system resource check DISABLED
MGCP xpc-codec: DISABLED, MGCP persistent hookflash: DISABLED
MGCP persistent offhook: ENABLED, MGCP persistent onhook: DISABLED
MGCP piggyback msg ENABLED, MGCP endpoint offset DISABLED
MGCP simple-sdp ENABLED
MGCP undotted-notation DISABLED
MGCP codec type g711ulaw, MGCP packetization period 20
MGCP JB threshold lwm 30, MGCP JB threshold hwm 150
MGCP LAT threshold lwm 150, MGCP LAT threshold hwm 300
MGCP PL threshold lwm 1000, MGCP PL threshold hwm 10000
MGCP CL threshold lwm 1000, MGCP CL threshold hwm 10000
MGCP playout mode is adaptive 60, 40, 200 in msec
MGCP Fax Playout Buffer is 300 in msec
MGCP media (RTP) dscp: ef, MGCP signaling dscp: af31
MGCP default package: trunk-package
MGCP supported packages: gm-package dtmf-package trunk-package
line-package
                         hs-package rtp-package ms-package dt-package
mo-package
                         mt-package sst-package
MGCP Digit Map matching order: shortest match
SGCP Digit Map matching order: always left-to-right
MGCP VoAAL2 ignore-lco-codec DISABLED
MGCP T.38 Fax is DISABLED
MGCP T.38 Fax ECM is ENABLED
MGCP T.38 Fax NSF Override is DISABLED
MGCP T.38 Fax Low Speed Redundancy: 0MGCP T.38 Fax High Speed
Redundancy: 0
MGCP control bind :DISABLED
MGCP media bind :DISABLED
MGCP Upspeed payload type for G711ulaw: 0,  G711alaw: 8
MGCP Static payload type for G.726-16K codec
MGCP Dynamic payload type for G.726-24K codec
MGCP Dynamic payload type for G.Clear codec
MGCP Guaranteed scheduler time is disabled

What appears to be missing?  Let me know if you need config snippets...
Now, my PRI is not plugged in yet, but I didn't think that was
necessary..  Any tips are greatly appreciated!!

Thanks,
--
Anthony Mendoza


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.8/22 - Release Date: 6/17/2005
 


CONFIDENTIALITY NOTICE: The information contained in this message and
or attachments is intended only for the person or entity to which it is
addressed and may contain confidential and/or privileged material. Any
review, retransmission, dissemination, copying, or other use of this
information by persons or entities other than the intended recipient is
prohibited. If you received this e-mail or its attachments in error, 
please contact the sender and delete the material from any system and 
destroy any copies.