[cisco-voip] Question on PRI Gateway

Sun Jun 19 22:17:02 EDT 2005

Thanks!  I'll get my loopback plugged in tomorrow! 

-Anthony 
-----Original Message-----
From: Tim Frazee [mailto:tfrazee at aosgs.com] 
Sent: Sunday, June 19, 2005 4:27 PM
To: Anthony Mendoza; Cisco VoIP
Subject: RE: [cisco-voip] Question on PRI Gateway

You will need at least layer 2 to register.

I normally plug in a loopback plug for staging.

Timothy Frazee
Enterprise Engineer
AOS Global Solutions

Cisco IP Phone: 636.680.1065
Cellular Phone: 314.753.7506
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony Mendoza
Sent: Sunday, June 19, 2005 1:45 PM
To: Cisco VoIP
Subject: [cisco-voip] Question on PRI Gateway

I've got my 3640 properly configured (or so I believe), but it isn't
showing up as registered on my CCM (4.x)..  To me it appears as though
the gateway is properly configured as it shows as being "registered" to
the primary CCM (my subscriber).

Here's what I see on the gateway:

rwc-faxgw-149-59#sho ccm-manager
MGCP Domain Name: rwc-faxgw-149-59.niku.com
Priority        Status                   Host
============================================================
Primary         Registered               10.150.4.11
First Backup    Backup Ready             10.150.4.12
Second Backup   Backup Ready             10.150.0.13

Current active Call Manager:    10.150.4.11
Backhaul/Redundant link port:   2428
Failover Interval:              30 seconds
Keepalive Interval:             15 seconds
Last keepalive sent:            13:41:25 PDT Jun 19 2005 (elapsed time:
00:00:07)
Last MGCP traffic time:         13:41:25 PDT Jun 19 2005 (elapsed time:
00:00:07)
Last failover time:             None
Last switchback time:           None
Switchback mode:                Graceful
MGCP Fallback mode:             Not Selected
Last MGCP Fallback start time:  None
Last MGCP Fallback end time:    None

Configuration Error History:
FAX mode: cisco

And

rwc-faxgw-149-59#show mgcp
MGCP Admin State ACTIVE, Oper State ACTIVE - Cause Code NONE MGCP
call-agent: 10.150.4.11 Initial protocol service is MGCP 0.1 MGCP
block-newcalls DISABLED MGCP send SGCP RSIP:
forced/restart/graceful/disconnected DISABLED MGCP quarantine mode
discard/step MGCP quarantine of persistent events is ENABLED MGCP
dtmf-relay voip codec all mode out-of-band MGCP dtmf-relay for VoAAL2
disabled for all codec types MGCP voip modem passthrough disabled MGCP
voaal2 modem passthrough disabled MGCP voip modem relay: Disabled.
MGCP TSE payload: 100
MGCP T.38 Named Signalling Event (NSE) response timer: 200 MGCP Network
(IP/AAL2) Continuity Test timer: 200 MGCP 'RTP stream loss' timer
disabled MGCP request timeout 500 MGCP maximum exponential request
timeout 4000 MGCP rtp unreachable timeout 1000 action notify MGCP
gateway port: 2427, MGCP maximum waiting delay 3000 MGCP restart delay
0, MGCP vad DISABLED MGCP rtrcac DISABLED MGCP system resource check
DISABLED MGCP xpc-codec: DISABLED, MGCP persistent hookflash: DISABLED
MGCP persistent offhook: ENABLED, MGCP persistent onhook: DISABLED MGCP
piggyback msg ENABLED, MGCP endpoint offset DISABLED MGCP simple-sdp
ENABLED MGCP undotted-notation DISABLED MGCP codec type g711ulaw, MGCP
packetization period 20 MGCP JB threshold lwm 30, MGCP JB threshold hwm
150 MGCP LAT threshold lwm 150, MGCP LAT threshold hwm 300 MGCP PL
threshold lwm 1000, MGCP PL threshold hwm 10000 MGCP CL threshold lwm
1000, MGCP CL threshold hwm 10000 MGCP playout mode is adaptive 60, 40,
200 in msec MGCP Fax Playout Buffer is 300 in msec MGCP media (RTP)
dscp: ef, MGCP signaling dscp: af31 MGCP default package: trunk-package
MGCP supported packages: gm-package dtmf-package trunk-package
line-package
                         hs-package rtp-package ms-package dt-package
mo-package
                         mt-package sst-package MGCP Digit Map matching
order: shortest match SGCP Digit Map matching order: always
left-to-right MGCP VoAAL2 ignore-lco-codec DISABLED MGCP T.38 Fax is
DISABLED MGCP T.38 Fax ECM is ENABLED MGCP T.38 Fax NSF Override is
DISABLED MGCP T.38 Fax Low Speed Redundancy: 0MGCP T.38 Fax High Speed
Redundancy: 0
MGCP control bind :DISABLED
MGCP media bind :DISABLED
MGCP Upspeed payload type for G711ulaw: 0,  G711alaw: 8 MGCP Static
payload type for G.726-16K codec MGCP Dynamic payload type for G.726-24K
codec MGCP Dynamic payload type for G.Clear codec MGCP Guaranteed
scheduler time is disabled

What appears to be missing?  Let me know if you need config snippets...
Now, my PRI is not plugged in yet, but I didn't think that was
necessary..  Any tips are greatly appreciated!!

Thanks,
--
Anthony Mendoza

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.8/22 - Release Date: 6/17/2005

CONFIDENTIALITY NOTICE: The information contained in this message and
or attachments is intended only for the person or entity to which it is
addressed and may contain confidential and/or privileged material. Any
review, retransmission, dissemination, copying, or other use of this
information by persons or entities other than the intended recipient is
prohibited. If you received this e-mail or its attachments in error, 
please contact the sender and delete the material from any system and 
destroy any copies.