[cisco-voip] Dial-Peers

[Court Schuett]

Hello,

We're having some problems with our dial-peers, I think.  I can make
outbound calls just fine.  However, inbound calls are not working.  When
I call in to the DIDs assigned to the PRIs, it just gives me a
dial-tone.

Here are the dial-peers: 


!
!
dial-peer voice 100 voip
 preference 1
 destination-pattern 33[0-9][0-9]
 voice-class codec 1
 voice-class h323 1
 session target ipv4:10.0.65.11
 dtmf-relay h245-alphanumeric
 ip qos dscp cs5 media
 no vad
!
dial-peer voice 101 voip
 preference 2
 destination-pattern 33[0-9][0-9]
 voice-class codec 1
 voice-class h323 1
 session target ipv4:10.0.65.10
 dtmf-relay h245-alphanumeric
 ip qos dscp cs5 media
 no vad
!
dial-peer voice 200 pots
 destination-pattern .T
 progress_ind alert enable 8
 progress_ind progress enable 8
 progress_ind connect enable 8
 fax rate disable
 no digit-strip
 port 1/2:23


Here is the debug voice ccapi inout:
*May  9 12:04:20.432: ISDN Se1/2:23 Q931: RX <- SETUP pd = 8  callref =
0x000D
        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98381
                Exclusive, Channel 1
        Calling Party Number i = 0x4181, '6309095560'
                Plan:ISDN, Type:Subscriber(local)
        Called Party Number i = 0x80, '3300'
                Plan:Unknown, Type:Unknown
*May  9 12:04:20.436:
//-1/4F4BDDC1800E/CCAPI/cc_api_display_ie_subfields:
   cc_api_call_setup_ind_common:
   cisco-username=
   ----- ccCallInfo IE subfields -----
   cisco-ani=6309095560
   cisco-anitype=4
   cisco-aniplan=1
   cisco-anipi=0
   cisco-anisi=1
   dest=3300
   cisco-desttype=0
   cisco-destplan=0
   cisco-rdn=
   cisco-rdntype=-1
   cisco-rdnplan=-1
   cisco-rdnpi=-1
   cisco-rdnsi=-1
   cisco-redirectreason=-1
*May  9 12:04:20.436:
//-1/4F4BDDC1800E/CCAPI/cc_api_call_setup_ind_common:
   Interface=0x6542B134, Call Info(
	Calling Number=6309095560
		(TON=Subscriber,
		NPI=ISDN,
		Screening=User,
		Passed, 
		Presentation=Allowed),
	Called Number=3300
		(TON=Unknown,
		NPI=Unknown),
	Calling Translated=FALSE,
	Subsriber Type Str=RegularLine,
	FinalDestinationFlag=FALSE,
	Incoming Dial-peer=200,
	Progress Indication=NULL(0),
	Calling IE Present=TRUE,
	Source Trkgrp Route Label=,
	Target Trkgrp Route Label=,
	CLID Transparent=FALSE),
	Call Id=-1



It looks to me like as the calls come in, they are going to the wrong
dial-peer (200).  What I don't understand is why.  Any help?

Thanks!

Court Schuett
 
630-909-5560
cschuett at hprlogistics.com