[cisco-voip] Dial-Peers

[Ryan Ratliff]

Add direct-inward-dial to your pots dial-peer as well as 
incoming-called-number .

-Ryan
On Jun 20, 2005, at 1:31 PM, Court Schuett wrote:

Hello,

We're having some problems with our dial-peers, I think.  I can make
outbound calls just fine.  However, inbound calls are not working.  When
I call in to the DIDs assigned to the PRIs, it just gives me a
dial-tone.

Here are the dial-peers:


!
!
dial-peer voice 100 voip
  preference 1
  destination-pattern 33[0-9][0-9]
  voice-class codec 1
  voice-class h323 1
  session target ipv4:10.0.65.11
  dtmf-relay h245-alphanumeric
  ip qos dscp cs5 media
  no vad
!
dial-peer voice 101 voip
  preference 2
  destination-pattern 33[0-9][0-9]
  voice-class codec 1
  voice-class h323 1
  session target ipv4:10.0.65.10
  dtmf-relay h245-alphanumeric
  ip qos dscp cs5 media
  no vad
!
dial-peer voice 200 pots
  destination-pattern .T
  progress_ind alert enable 8
  progress_ind progress enable 8
  progress_ind connect enable 8
  fax rate disable
  no digit-strip
  port 1/2:23


Here is the debug voice ccapi inout:
*May  9 12:04:20.432: ISDN Se1/2:23 Q931: RX <- SETUP pd = 8  callref =
0x000D
         Bearer Capability i = 0x8090A2
                 Standard = CCITT
                 Transer Capability = Speech
                 Transfer Mode = Circuit
                 Transfer Rate = 64 kbit/s
         Channel ID i = 0xA98381
                 Exclusive, Channel 1
         Calling Party Number i = 0x4181, '6309095560'
                 Plan:ISDN, Type:Subscriber(local)
         Called Party Number i = 0x80, '3300'
                 Plan:Unknown, Type:Unknown
*May  9 12:04:20.436:
//-1/4F4BDDC1800E/CCAPI/cc_api_display_ie_subfields:
    cc_api_call_setup_ind_common:
    cisco-username=
    ----- ccCallInfo IE subfields -----
    cisco-ani=6309095560
    cisco-anitype=4
    cisco-aniplan=1
    cisco-anipi=0
    cisco-anisi=1
    dest=3300
    cisco-desttype=0
    cisco-destplan=0
    cisco-rdn=
    cisco-rdntype=-1
    cisco-rdnplan=-1
    cisco-rdnpi=-1
    cisco-rdnsi=-1
    cisco-redirectreason=-1
*May  9 12:04:20.436:
//-1/4F4BDDC1800E/CCAPI/cc_api_call_setup_ind_common:
    Interface=0x6542B134, Call Info(
	Calling Number=6309095560
		(TON=Subscriber,
		NPI=ISDN,
		Screening=User,
		Passed,
		Presentation=Allowed),
	Called Number=3300
		(TON=Unknown,
		NPI=Unknown),
	Calling Translated=FALSE,
	Subsriber Type Str=RegularLine,
	FinalDestinationFlag=FALSE,
	Incoming Dial-peer=200,
	Progress Indication=NULL(0),
	Calling IE Present=TRUE,
	Source Trkgrp Route Label=,
	Target Trkgrp Route Label=,
	CLID Transparent=FALSE),
	Call Id=-1



It looks to me like as the calls come in, they are going to the wrong
dial-peer (200).  What I don't understand is why.  Any help?

Thanks!

Court Schuett

630-909-5560
cschuett at hprlogistics.com

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip