[cisco-voip] CTI Route Point Status

[Ryan Ratliff]

In general in the CCMAdmin status indicates whether a device is 
registered or not.    If the device has been previously registered, or 
has attempted to register before the last time CCM was restarted then 
its IP address will show up.  The only difference between "Not Found" 
and "Not Registered" is that a device will have been registered 
previously (or attempted to) for it to show as "Not Registered".

-Ryan
On Jun 28, 2005, at 4:59 PM, Paul Yago wrote:

Hello, in the CTI Route Point summary screen "Find and list CTI Route
Points". There is both a Status and an IP Address field. I've been
trying to find some clarification about the values of these fields in
cases where the 3rd party device is not available.

Sometimes our CTIRP has the Status="Not Found" with no IPAddress = '',
and other times Status="Not Registered", and IP Address="10.2.0.51".
This is a 3rd party device which has been registered many times
previously.

What conditions are triggering the status in this case? Is there a
timeout. Is it configurable?

Thanks,
Paul

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip