[cisco-voip] CTI Route Point Status

[Wes Sisk]

use RTMT to get the actual CTI registration status and IP.

/Wes

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Paul Yago
Sent: Tuesday, June 28, 2005 5:00 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CTI Route Point Status


Hello, in the CTI Route Point summary screen "Find and list CTI Route
Points". There is both a Status and an IP Address field. I've been
trying to find some clarification about the values of these fields in
cases where the 3rd party device is not available. 

Sometimes our CTIRP has the Status="Not Found" with no IPAddress = '',
and other times Status="Not Registered", and IP Address="10.2.0.51".
This is a 3rd party device which has been registered many times
previously.

What conditions are triggering the status in this case? Is there a
timeout. Is it configurable?

Thanks,
Paul

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip