[cisco-voip] Intermittent MGCP/FXS DTMF Issue
Anthony Guida
aguida at global-com.com
Thu Jun 30 16:47:27 EDT 2005
Hello,
We have a customer which is having intermittent DTMF relay issues where
their auto-attendant doesn't receive all the digits correctly. The customer
has a Cisco 3745 running CME and is connecting to us via an FXO port to
an Cisco IAD 2431 with FXS interface. The signaling protocol is MGCP.
Here is the call flow:
PSTN Switch--->5350 Gateway--->3rd party call agent--->MGCP
IAD-FXS--->FXO-3745
Call comes in successfully, caller gets prompted to dial an extension,
caller
dials 102#, auto-attendant responds that the extension is invalid. Also,
when
customer removes the 'caller-id enable' option, there aren't any DTMF
issues.
Relevant parts of IAD config:
voice-port 2/0
no vad
no battery-reversal
idle-voltage high
dial-peer voice 1 pots
application mgcpapp
port 2/0
Relevant parts of 3745 config:
voice-port 1/0/0
translate calling 2
connection plar 100
caller-id enable
dial-peer voice 671 voip
destination-pattern 671
session protocol sipv2
session target ipv4:10.10.11.2
dtmf-relay sip-notify
codec g711ulaw
no vad
Any information is appreciated.
Thanks,
Anthony
More information about the cisco-voip
mailing list