[cisco-voip] FXO port busy

[Bryan Deaver]

> From: yy <yylim at thiss.net>
> Date: Wed, 04 May 2005 09:02:13 +0800
> To: <cisco-voip at puck.nether.net>
> Subject: [cisco-voip] FXO port busy
> 
> Hi guys,
> 
> 1. I'm having a slight problem here. Sometimes when a user does not hang
> up or terminate properly, my FXO port stays in a busy state and users
> can no longer dial out to the PSTN. Is there some kind of timeout that I
> can set on my cisco 2600 router so that I will free the port after a
> certain period of time?
> 

Sounds like the old disconnect supervision issue; or lack of that is.  Check
out this url for your options:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080
0ae2d1.shtml


> 2. Also, I understand that we can do accounting on the Cisco router using :
> 
> aaa new-model
> aaa group server radius aaa.router
> server RADIUS_SERVER_IP auth-port 1812 acct-port 1813
> aaa accounting connection h323 start-stop group radius
> gw-accounting h323
> gw-accounting h323 vsa
> gw-accounting voip
> 

Yes, still use 'h323' in your accounting commands even though this is sip.

Check out the following url for detailed information on the VSAs used for
accounting records.

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/vapp_dev/vsa
ig3.htm


> 
> However, on which database / table is it stored? What information will
> be written to the dBase? Currently, I'm using Sip instead of H323, so
> how can I change the configuration to do gateway accounting for Sip?
> 
> Please advise.
> 
> 
> Regards,
> YY
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip