[cisco-voip] Replacement for WS-6608-T1?

[Voll, Scott]

we run one of the CMM blades in our Native 6509.  Works great.  in the 6 port PRI T1 card three are running NI2 and three are running Qsig.  we are also using the ACT card for Transcoding and ad-hoc  conferences.  Should do what you need.  I did find a Multicast issue in the newest release of Code.  
 
scott

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Kevin Thorngren
Sent: Fri 5/13/2005 4:36 AM
To: Carl Hester
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Replacement for WS-6608-T1?



Hi Carl,

The CMM module is the option you will want to look at:
http://www.cisco.com/en/US/products/hw/modules/ps3115/
products_data_sheet09186a00800e9c1f.html

Thanks,
Kevin
On May 13, 2005, at 6:56 AM, Carl Hester wrote:

> We currently have 6509 as our cores in hybrid mode.  We have a 
> WS-6608-T1
> PRI card in the core.
>
> Our new cores are 6513 which will be in Native mode.  I am told that a 
> 6608
> blade will not work in a 6513 in Native Mode.  What is the best option 
> to
> replace this card, hopefully providing the same functionality?
>
> Thanks in advance,
>
> CH
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050515/22b14b9b/attachment.html