[cisco-voip] Jitter above 170....

[ALI Rijas Mannanthara]

Voice calls quality very poor from IP phones when dialed out from one of
the buildings of the campus. 

The branch office has 4506 in-line power and 4Mbps ETH termination to
main building  controlled by a PIX.

>From the main building IP phones quality is fine.

 

I tried not to use in-line but with an adapter.

Setting phones and switch speed to static.

Tried AutoQoS option also 

 

 

The link utilization is quite normal .Still making calls/conference
calls from that BLDNG gets to poor quality .Please advice...

 

 

Can we fetch the call quality from Jitter on phone ?????

 

Thanks ,

 

Rijas

EPBX : 6226

VoIP : 248-994-4858

 

This E-Mail is intended only for the use of the individual or entity to
which it is addressed and may contain information that is privileged,
confidential, and exempt from disclosure. If the reader of this document
is not the intended recipient or an employee or agent responsible for
delivering this document to the intended recipient, you are hereby
notified that any dissemination, distribution, or copying of this
document is strictly prohibited. If you have received this document in
error, please delete it. Thank you. 

 

Confidentiality Statement:

This message is intended only for the individual or entity to which it is addressed. It may contain privileged, confidential information which is exempt from disclosure under applicable laws. If you are not the intended recipient, please note that you are strictly prohibited from disseminating or distributing this information (other than to the intended recipient) or copying this information. If you have received this communication in error, please notify us immediately by return email.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050517/6cb276f2/attachment.html