[cisco-voip] Nm-hdv and conferencing

[Court Schuett]

I'd change the Meet-Me one too.  That's the one we use a lot more often
than the ad-hoc.

 

 

Court Schuett

 

630-909-5560

cschuett at hprlogistics.com

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Wednesday, May 18, 2005 12:58 PM
To: Ruttman, Peter G.; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Nm-hdv and conferencing

 

Maximum Ad Hoc Conference*
<javascript:%20openHelpWindow('vendorconfighelp.asp?instance=xmldi://cis
co.com/serviceParameters/0&title=Cisco+CallManager+Parameters+Help&showA
ll=Yes#MaxAdHocConference');> 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Wednesday, May 18, 2005 10:56 AM
To: Ruttman, Peter G.; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Nm-hdv and conferencing

 

Service parameter in CM.  default is 4

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ruttman, Peter
G.
Sent: Wednesday, May 18, 2005 10:54 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Nm-hdv and conferencing

 

Folks, 

We've been using the nm-hdv cards for awhile and we were just asked how
many participates we can support in a conference.  Checking out the
documentation it looks like we should be able to support 6 people in the
conference on this type of card.  I tested it out on one of our systems
and I can only get 4 parties in total on the conference call.  I get the
message "Exceed maximum parties" on the phone when I try to add the 5th
party.

I then built up the same configuration in the lab on 4.1.3 and got the
same results.  We use G.711 Regions.  On the call manager side I am
using a Cisco ISO Conference Bridge.  Here is some of the configuration
from the 3745 voice gateway:

sccp local FastEthernet0/0 
sccp 
sccp ccm 10.8.1.4 priority 1 
sccp mtp sessions 10 
! 
dspfarm confbridge maximum sessions 5 
dspfarm rtp timeout 60 
dspfarm connection interval 60 
dspfarm 
! 

Any guesses on why I am being limited to 4 participants? 

Pete 


IMPORTANT NOTICE: The preceding message may be confidential or protected
by the attorney-client privilege. It is not intended for transmission
to, or receipt by, any unauthorized persons. If you believe that it has
been sent to you in error, do not read it. Please reply to the sender
that you have received the message in error. Then destroy it. Thank you.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050518/8875cead/attachment.html