[cisco-voip] Another Gatekeeper Question

[Andrew Dignan]

Ok, I am just about there.....

Is there any way to have the gatekeeper send an ARQ back to the
originating CallManager if a "zone prefix" exists that points to another
zone but the remote CallManager doesn't have a device registered with the
called number?

For example, in my gatekeeper config I have the following command:

zone prefix DC1_CCM_Zone 202481* gw-priority 10 WDC1TRUNK_2 9 WDC1TRUNK_1
8 WDC1TRUNK_3

However, in that DC1_CCM_Zone the only extensions are "20248180xx".  So,
if someone in another zone dials 2024815000 it goes to the gatekeeper, it
matches the prefix above, and the call gets a fast busy.  I want it to get
an ARQ back so it can fail to the next Route Group in my Route List. I do
have "arq reject-unknown-prefix" but that doesn't fix this scenario.  If I
can't find a way to do this I will have to get crazy with zone prefixes
and drill down to exact DID level which I would rather not do.  There has
to be a way to accomplish this.

TIA,

Andy Dignan