[cisco-voip] Another Gatekeeper Question

[Andrew Dignan]

Excuse me, receive an ARJ not ARQ.

> Ok, I am just about there.....
>
> Is there any way to have the gatekeeper send an ARQ back to the
> originating CallManager if a "zone prefix" exists that points to another
> zone but the remote CallManager doesn't have a device registered with the
> called number?
>
> For example, in my gatekeeper config I have the following command:
>
> zone prefix DC1_CCM_Zone 202481* gw-priority 10 WDC1TRUNK_2 9 WDC1TRUNK_1
> 8 WDC1TRUNK_3
>
> However, in that DC1_CCM_Zone the only extensions are "20248180xx".  So,
> if someone in another zone dials 2024815000 it goes to the gatekeeper, it
> matches the prefix above, and the call gets a fast busy.  I want it to get
> an ARQ back so it can fail to the next Route Group in my Route List. I do
> have "arq reject-unknown-prefix" but that doesn't fix this scenario.  If I
> can't find a way to do this I will have to get crazy with zone prefixes
> and drill down to exact DID level which I would rather not do.  There has
> to be a way to accomplish this.
>
> TIA,
>
> Andy Dignan
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>