[cisco-voip] VG200 FXO hang-up problem

Kádár Zsolt Zsolt.Kadar at Synergon.hu
Fri May 27 05:18:36 EDT 2005


 

Hi!

This is a tipical FXO problem, try the following command:

voice-port x/y
supervisory disconnect 


-----Original Message-----
From: Steven [mailto:s.jack at compserv.gla.ac.uk]
Sent: Friday, May 27, 2005 11:04 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] VG200 FXO hang-up problem

Hi I wonder if anyone can suggest anything to help.
I have a CM4.1 with a VG200 gateway. The gateway has 2 dual FXO modules.
Connecting this to an analogue line from our Siemens exchange works, but I have a problem with call disconnects. When an incoming call occurs and the call is unanswered, the phone will continue to ring for a very long period after the calling party has disconnected.
I have changed many of the parameters from Loop start to Ground start, etc with no effect.

Any help appreciated.

TIA

Steven Jack
Videoconferencing Manager
University of Glasgow
Computing Service
Glasgow G12 8QQ
UK
Tel +44(0)1413303828 Fax +44(0)1413303820
Email: s.jack at compserv.gla.ac.uk



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



Ez az üzenet és a hozzá kapcsolódó fájlok, tervezetek kizárólag a
Címzettnek szólnak, a bennük foglalt információk bizalmasak, melyek
titokban maradásához a Synergon Informatika Rt.-nek jogilag méltányolható
érdeke fűződik. Amennyiben valamely hiba folytán Ön nem a címzettje ennek a
levélnek, kérjük, semmisítse meg, és értesítse az üzenet küldőjét. Az
üzenet az elküldés előtt vírusellenőrzésen esett át, de a vírusmentességére
nincs semmilyen garancia, ezért kérjük, ellenőrizze azt!

DISCLAIMER

This e-mail and any attached files are confidential and may be legally
privileged. The content of this e-mail is subject of efforts by Synergon to
maintain its confidentiality. Also this e-mail is intended for the sole use
of the individual or entity to whom it is addressed. If you are not the
addressee, and received this transmission in error please delete this
e-mail and notify its sender immediately. This e-mail message has been
checked for computer viruses but it could still be infected. Please test it
for viruses before use.





More information about the cisco-voip mailing list