[cisco-voip] Change phone model

[Lelio Fulgenzi]

If you have a lot of them that you have to change, I'm sure you could work some magic with the export phones tool in BAT, then manipulate the data to make them 7960s when you import them back in.

Worth the trouble for 10 phones? Probably not. Any more than 50 I would seriously consider it though.
  ----- Original Message ----- 
  From: Wes Sisk 
  To: Bill Riley III ; cisco-voip at puck.nether.net 
  Sent: Friday, November 04, 2005 1:17 PM
  Subject: RE: [cisco-voip] Change phone model


  delete the phone and create new.

  /Wes
  -----Original Message-----
  From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Bill Riley III
  Sent: Friday, November 04, 2005 12:42 PM
  To: cisco-voip at puck.nether.net
  Subject: [cisco-voip] Change phone model


   

  Hello everyone. I have several phones that were input incorrectly as 7940's and I need to change them to 7960's does anyone know how I can do this without entering them again such as through a SQL command. Thanks.

   

  Thanks,

  Bill Riley

  Network Engineer

  Jack Henry & Associates

  Office:417-888-4900

  briley at jackhenry.com

   

   



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051104/0a0d3a9e/attachment.html