[cisco-voip] Question about phone loads... upgrading ata-186 and 79xx phones..

[Tim Reimers]

Is there a way to have more than one load available for a device?

 

I'm currently loading ATA030100SCCP040211A.zup onto my ATAs 

 

I'd like to experiment with ata_03_02_01_sip_050616_a.zip

 

I would just update one with the SIP image manually

 

But for some reason I cannot get the sata186us.exe to allow me to update
the firmware over the voice menu - it's just silent after entering the

 

100#XXX*XXX*XXX*XXX*8000#  (where X is IP address, of course)

 

 

So I thought "self, why don't I just bring one into the office and try
loading the correct firmware on it via the CallManager where I can just
set up the load, and have a go at upgrading them there... and probably
be able to do all of them and take back home loaded with SIP images..

 

Got to work and recalled that I use SCCP, not SIP...

 

Any ideas on how to get _one_ ,but not ALL of the ata-186s loaded with
SIP using the CCM?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051104/07a7e07c/attachment.html