[cisco-voip] Disconnect of the plar connection to the ccm

[Alex A. Pavlenko]

What do you mean the call stays for less than a second? Do you hear the 
caller
and caller hears you for a short period or call is disconnected  immediately 
after your phone
goes off hook? In last case it could be codec mismatch. As a variant check 
region/location
configuration on CCM and dial-peer configuration on the gateway.

--
Alex Pavlenko
System Administrator
Sandy Info

----- Original Message ----- 
From: "Waleed Samir Akl" <waleed_samir at rayaintegration.com>
To: <cisco-voip at puck.nether.net>
Sent: Tuesday, November 08, 2005 2:15 AM
Subject: [cisco-voip] Disconnect of the plar connection to the ccm


> Dear group
>
> My ccm is connected to a gateway using H.323. The gateway has a FXO port
> configured to plar a DN number on the ccm using the connection plar opx
> command when a call received on this port. during testing the call 
> received
> on the FXO port ring on the DN line but once I answered the call, it stays
> for less than a second then disconnect.
> Any idea how to correct this issue
>



--------------------------------------------------------------------------------


> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>