[cisco-voip] Disconnect of the plar connection to the ccm

[Lawrence E. Bakst]

1. I have seen something similar and it turned out that changing the FXO cable fixed it. I could not find anything obviously wrong with the old cable, however.

2. Try a different FXO port and see if that works better.

3. After the call fails, do a "show voice trace x/y/z" command, where x/y/z is the port you are having trouble with. Post that output here if changing the cable or port doesn't work.

Best,

leb

At 11:19 AM +0300 11/8/05, Alex A. Pavlenko wrote:
>What do you mean the call stays for less than a second? Do you hear the
>caller
>and caller hears you for a short period or call is disconnected  immediately
>after your phone
>goes off hook? In last case it could be codec mismatch. As a variant check
>region/location
>configuration on CCM and dial-peer configuration on the gateway.
>
>--
>Alex Pavlenko
>System Administrator
>Sandy Info
>
>----- Original Message -----
>From: "Waleed Samir Akl" <waleed_samir at rayaintegration.com>
>To: <cisco-voip at puck.nether.net>
>Sent: Tuesday, November 08, 2005 2:15 AM
>Subject: [cisco-voip] Disconnect of the plar connection to the ccm
>
>
>> Dear group
>>
>> My ccm is connected to a gateway using H.323. The gateway has a FXO port
>> configured to plar a DN number on the ccm using the connection plar opx
>> command when a call received on this port. during testing the call
>> received
>> on the FXO port ring on the DN line but once I answered the call, it stays
>> for less than a second then disconnect.
>> Any idea how to correct this issue
>>
>
>
>
>--------------------------------------------------------------------------------
>
>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip