[cisco-voip] 6608 and ATA Faxing

[Voll, Scott]

Does the new Fax support Super G3 (33.6) and error correction mode(ECM)?
If so, turn both off.  I have not been able to get faxes to work with
either of these enabled.

Our big Xerox work stations are a prefect example of ones we had to turn
this off on.

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Wednesday, November 16, 2005 9:37 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 6608 and ATA Faxing

 
I have a customer who installed a new fax machine connect to an ATA and
can not Fax to the PSTN.  The gateway is a 6608 blade.  I don't have
anymore details yet, but is there anything obvious that could be the
problem?  Faxing worked before the new fax machine, and a support
engineer confirmed the machine is not broken.

Thanks

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip