[cisco-voip] UNITY 4.0(3) and NIC Teaming on MCS-7825H

[Fred]

I'm 99% certain that the driver to enable NIC teaming is installed as part
of the platform config discs that ship with Unity, at least on all the
7835/7845 servers I've put up.  If you look in your Control Panel do you see
an entry for "HP Network"?  If you do, then this would be the place where
you configure teams.

 

regards, Fred

 

  _____  

Hi, 
 
I am installing Unity 4.0(3) on Cisco MCS-7825H server. I would like to
configure NIC teaming. In the installation istruction I find:
 
If you are configuring an MCS-7825H, MCS-7835H, or MCS-7845H server,
configure NFT teaming by using the network teams property sheet of the
Compaq Network Teaming and Configuration Utility (CPQNTAC). 
 
Unfortenetly I can't find a CPQNTAC utility on CDs which are delivered with
HW or with Unity. 
 
Any ideas ?
 
 
Mladen

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051121/89f4cc03/attachment.html