[cisco-voip] overhead paging

[Rares Ispas]

You might want to try SynApps' SA-Announce:
http://www.syn-apps.net

It can page through Cisco IP Phones and legacy analog speakers. You just  
dial a number, enter the security code (if any) and it will page your  
voice across the members of that group. Busy phones are not paged.

Besides that, it can do:
- Hoot-n-Holler (dial a number and have it autoanswer on speaker)
- Walkie Talkie (bidirectional page)
- Text messages broadcast


Regards,
Rares

RAI Software SRL, Bucharest, Romania
site: www.raisoftware.ro
YM: rares_ispas2001
MSN: irares at hotmail.com

On Wed, 23 Nov 2005 04:00:54 +0200, IT <it at cimgroup.com> wrote:

> I know this is a discussion that occurs often, but I was hoping for some
> recent opinions.
> How has everyone solved the lack of a built-in paging system for CM?
> Are you using separate hardware? RJ-45 ceiling speakers? software which
> broadcasts audio from your cisco phones?
>
> Thanks,
> Avidan
>
> ******************************************************
> This email may contain trade secrets and/or other information that is
> proprietary and/or confidential. Use of this by anyone other than the
> intended recipient(s) is prohibited and may be unlawful. If you are not
> the intended recipient, delete the e-mail and notify us immediately.
> ******************************************************
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip