[cisco-voip] overhead paging

[Erick Bergquist]

Most of the folks I've worked with use various legacy?
paging units from valcom, etc that connect with analog
FXO or FXS ports to gateways, ATAs, etc.

I am aware of a product from Cistera that broadcasts
pages to phones, and also has hookups to go to
directly to overhead speakers without need of legacy
analog paging equipment. You then could page to both
IP phones and/or the overhead speakers from IP Phones.
It had groups/zones and permissions so you chose the
group you wanted to send to, etc.  

--- IT <it at cimgroup.com> wrote:

> I know this is a discussion that occurs often, but I
> was hoping for some
> recent opinions.
> How has everyone solved the lack of a built-in
> paging system for CM?
> Are you using separate hardware? RJ-45 ceiling
> speakers? software which
> broadcasts audio from your cisco phones?
> 
> Thanks,
> Avidan
> 
>
******************************************************
> This email may contain trade secrets and/or other
> information that is 
> proprietary and/or confidential. Use of this by
> anyone other than the 
> intended recipient(s) is prohibited and may be
> unlawful. If you are not 
> the intended recipient, delete the e-mail and notify
> us immediately.
>
******************************************************
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



		
__________________________________ 
Start your day with Yahoo! - Make it your home page! 
http://www.yahoo.com/r/hs