[cisco-voip] How to limit the number of conference participants?

[Lelio Fulgenzi]

Not from what experience shows. Also, the help file specifically refers to the number of participants. I wish we could limit the number of conference calls. This way, we could have deployed conference calling on a CallManager without worry of to many conference calls overloading the system.


--------------------------------------------------------------------------------
      Maximum Ad Hoc Conference : This parameter specifies the maximum number of participants that are allowed in a single ad hoc conference. The value of this field depends on the capabilities of software/hardware conference bridge; for example, the capability software conference bridge can be up to 64. Warning: CTI applications do not support more than 16 participants. So although an Ad Hoc conference can support more than 16 participants, the participants list used by CTI applications will display only the 16 most recent conference participants. 
      This is a required field.
      Default: 4.
      Minimum: 3.
      Maximum: 64.
     
      Maximum MeetMe Conference Unicast : This parameter specifies the maximum number of participants that are allowed in a single Unicast Meetme Conference. The value of this field depends on the capabilities of software/hardware conference bridge; for example, the capability of software conference bridge can be up to 128. Specifying a value less than 3 allows upto 3 participants 
      This is a required field.
      Default: 10.
      Minimum: 1.
      Maximum: 128.
     

--------------------------------------------------------------------------------
 
  ----- Original Message ----- 
  From: Ciscozest 
  To: Lelio Fulgenzi ; cisco-voip at puck.nether.net 
  Sent: Friday, November 25, 2005 9:11 PM
  Subject: Re: [cisco-voip] How to limit the number of conference participants?


  HI Lelio,

  As far as I know, the two options in CallManager service parameters are to limit the number of conference, NOT the number of member/participant in a conference. Please correct me if i am wrong. thanks
    ----- Original Message ----- 
    From: Lelio Fulgenzi 
    To: Robin H ; cisco-voip at puck.nether.net 
    Sent: Friday, November 25, 2005 9:52 PM
    Subject: Re: [cisco-voip] How to limit the number of conference participants?


    service parameters > Cisco CallManager > CTRL-F & look for 'ad hoc' > the second or third should be "Maximum Ad Hoc Conference"

    Just below it should be the meet me conference maximum.

    --------------------------------------------------------------------------------
    Lelio Fulgenzi, B.A.
    Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
    (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
    "I had a coffee and Coke at lunch today...and now, I've got more jitter than an
    IP phone on a long haul 10base2 connection"                                           LFJ
      ----- Original Message ----- 
      From: Robin H 
      To: cisco-voip at puck.nether.net 
      Sent: Friday, November 25, 2005 4:02 AM
      Subject: [cisco-voip] How to limit the number of conference participants?


      Hi,

      I need to limit the number of conference participants for either ad-hoc or meet-me type. I only know how to limit the number of conferences and not the number of conference participants. Does anyonee know how to do this? thanks 


--------------------------------------------------------------------------


      _______________________________________________
      cisco-voip mailing list
      cisco-voip at puck.nether.net
      https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051125/057c3e7a/attachment.html