[cisco-voip] How to limit the number of conference participants?

[Ryan Ratliff]

With the CM software CFB you are only limited by the max number of  
conference participants total.  By default in 4.1(3) it is 48 and  
note that this is completely independent of the number of  
conferences.   Ignoring the max-participants you could have one  
conference of 40 people and two conferences of 4 people and the  
server would be out of resources.

-Ryan

On Nov 25, 2005, at 9:39 PM, Lelio Fulgenzi wrote:

Not from what experience shows. Also, the help file specifically  
refers to the number of participants. I wish we could limit the  
number of conference calls. This way, we could have deployed  
conference calling on a CallManager without worry of to many  
conference calls overloading the system.

Maximum Ad Hoc Conference :This parameter specifies the maximum  
number of participants that are allowed in a single ad hoc  
conference. The value of this field depends on the capabilities of  
software/hardware conference bridge; for example, the capability  
software conference bridge can be up to 64. Warning: CTI applications  
do not support more than 16 participants. So although an Ad Hoc  
conference can support more than 16 participants, the participants  
list used by CTI applications will display only the 16 most recent  
conference participants.
This is a required field.
Default: 4.
Minimum: 3.
Maximum: 64.
Maximum MeetMe Conference Unicast :This parameter specifies the  
maximum number of participants that are allowed in a single Unicast  
Meetme Conference. The value of this field       depends on the  
capabilities of software/hardware conference bridge; for example, the  
capability of software conference bridge can be up to 128. Specifying  
a value less than 3 allows upto 3 participants
This is a required field.
Default: 10.
Minimum: 1.
Maximum: 128.
----- Original Message -----
From: Ciscozest
To: Lelio Fulgenzi ; cisco-voip at puck.nether.net
Sent: Friday, November 25, 2005 9:11 PM
Subject: Re: [cisco-voip] How to limit the number of conference  
participants?

HI Lelio,

As far as I know, the two options in CallManager service parameters  
are to limit the number of conference, NOT the number of member/ 
participant in a conference. Please correct me if i am wrong. thanks
----- Original Message -----
From: Lelio Fulgenzi
To: Robin H ; cisco-voip at puck.nether.net
Sent: Friday, November 25, 2005 9:52 PM
Subject: Re: [cisco-voip] How to limit the number of conference  
participants?

service parameters > Cisco CallManager > CTRL-F & look for 'ad hoc' >  
the second or third should be "Maximum Ad Hoc Conference"

Just below it should be the meet me conference maximum.

------------------------------------------------------------------------ 
--------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I had a coffee and Coke at lunch today...and now, I've got more  
jitter than an
IP phone on a long haul 10base2  
connection"                                           LFJ
----- Original Message -----
From: Robin H
To: cisco-voip at puck.nether.net
Sent: Friday, November 25, 2005 4:02 AM
Subject: [cisco-voip] How to limit the number of conference  
participants?

Hi,

I need to limit the number of conference participants for either ad- 
hoc or meet-me type. I only know how to limit the number of  
conferences and not the number of conference participants. Does  
anyonee know how to do this? thanks


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip