[cisco-voip] Q.SIG: problem with partitions

[Ruben Montes]

Hello,

 

I have configured an MGCP QSIG (C2851 with 2xE1 and CCM4.1(3)) with an Ericsson MD110. All the calls to the PBX numbers from IP phones work fine.

The problem apperas when I try to call an IP phone from the PBX: I can only reach those phones which aren't assigned to any partition or CSS. When I change the partition, the result from a debug q931 is 'Unassigned/unallocated number' and I cannot reach the phone.

It is my first QSIG with MGCP and partitions so I assume it's a configuration issue related with partitions, but I don't know where to search...

I have followed the Cisco doc " Cisco Callmanager4.1-PBX Interoperability Ericsson MD-110" with no luck...

Thanks in advance;

Ruben

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051130/4020221c/attachment.html