[cisco-voip] Q.SIG: problem with partitions

[Kevin Thorngren]

The Calling Search Space assigned to the MGCP GW will determine what 
devices (Partitions) it can call.  Sounds like you need to assign a CSS 
to the GW that contains the partition(s) that the phones are in.

Kevin
On Nov 30, 2005, at 6:03 AM, Ruben Montes wrote:

> Hello,
>
>  
>
> I have configured an MGCP QSIG (C2851 with 2xE1 and CCM4.1(3)) with an 
> Ericsson MD110. All the calls to the PBX numbers from IP phones work 
> fine.
>
> The problem apperas when I try to call an IP phone from the PBX: I can 
> only reach those phones which aren't assigned to any partition or CSS. 
> When I change the partition, the result from a debug q931 is 
> 'Unassigned/unallocated number' and I cannot reach the phone.
>
> It is my first QSIG with MGCP and partitions so I assume it's a 
> configuration issue related with partitions, but I don't know where to 
> search...
>
> I have followed the Cisco doc " Cisco Callmanager4.1-PBX 
> Interoperability Ericsson MD-110" with no luck...
>
> Thanks in advance;
>
> Ruben_______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip