[cisco-voip] Q.SIG: problem with partitions

[Ruben Montes]

Hello Kevin,
 
I have tried that, adding the CSS in the mgcp endpoint configuration page with no luck... It's a little bit strange what is happening...

	-----Mensaje original----- 
	De: Kevin Thorngren [mailto:kthorngr at cisco.com] 
	Enviado el: mié 30/11/2005 13:03 
	Para: Ruben Montes 
	CC: cisco-voip at puck-nether.net 
	Asunto: Re: [cisco-voip] Q.SIG: problem with partitions
	
	

	The Calling Search Space assigned to the MGCP GW will determine what
	devices (Partitions) it can call.  Sounds like you need to assign a CSS
	to the GW that contains the partition(s) that the phones are in.
	
	Kevin
	On Nov 30, 2005, at 6:03 AM, Ruben Montes wrote:
	
	> Hello,
	>
	>  
	>
	> I have configured an MGCP QSIG (C2851 with 2xE1 and CCM4.1(3)) with an
	> Ericsson MD110. All the calls to the PBX numbers from IP phones work
	> fine.
	>
	> The problem apperas when I try to call an IP phone from the PBX: I can
	> only reach those phones which aren't assigned to any partition or CSS.
	> When I change the partition, the result from a debug q931 is
	> 'Unassigned/unallocated number' and I cannot reach the phone.
	>
	> It is my first QSIG with MGCP and partitions so I assume it's a
	> configuration issue related with partitions, but I don't know where to
	> search...
	>
	> I have followed the Cisco doc " Cisco Callmanager4.1-PBX
	> Interoperability Ericsson MD-110" with no luck...
	>
	> Thanks in advance;
	>
	> Ruben_______________________________________________
	> cisco-voip mailing list
	> cisco-voip at puck.nether.net
	> https://puck.nether.net/mailman/listinfo/cisco-voip
	
	

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051130/bec18e40/attachment-0001.html