[cisco-voip] Q.SIG: problem with partitions

[Ruben Montes]

Hello,
 
is working now with the same configuration... The only diference is that my publisher crashed one hour ago and when it was restarted, this worked... 
Now I have to troubleshoot what has happened: no eventviewer logs, no network connectivity but port up... Something very strange!!! We are putting this cluster in production next week and I doesn't feel vey comfortable with that...
 
Regards,
 
ruben

	-----Mensaje original----- 
	De: Erick Bergquist [mailto:erickbe at yahoo.com] 
	Enviado el: mié 30/11/2005 13:30 
	Para: Ruben Montes; Kevin Thorngren 
	CC: cisco-voip at puck-nether.net 
	Asunto: RE: [cisco-voip] Q.SIG: problem with partitions
	
	

	How about the CSS under the Incoming calls section of
	the gateway config page? Did you reset the gateway in
	CCM after making changes?
	
	--- Ruben Montes <Ruben.Montes at eu.didata.com> wrote:
	
	> Hello Kevin,
	> 
	> I have tried that, adding the CSS in the mgcp
	> endpoint configuration page with no luck... It's a
	> little bit strange what is happening...
	>
	>       -----Mensaje original-----
	>       De: Kevin Thorngren [mailto:kthorngr at cisco.com]
	>       Enviado el: mi� 30/11/2005 13:03
	>       Para: Ruben Montes
	>       CC: cisco-voip at puck-nether.net
	>       Asunto: Re: [cisco-voip] Q.SIG: problem with
	> partitions
	>      
	>      
	>
	>       The Calling Search Space assigned to the MGCP GW
	> will determine what
	>       devices (Partitions) it can call.  Sounds like you
	> need to assign a CSS
	>       to the GW that contains the partition(s) that the
	> phones are in.
	>      
	>       Kevin
	>       On Nov 30, 2005, at 6:03 AM, Ruben Montes wrote:
	>      
	>       > Hello,
	>       >
	>       > 
	>       >
	>       > I have configured an MGCP QSIG (C2851 with 2xE1
	> and CCM4.1(3)) with an
	>       > Ericsson MD110. All the calls to the PBX numbers
	> from IP phones work
	>       > fine.
	>       >
	>       > The problem apperas when I try to call an IP
	> phone from the PBX: I can
	>       > only reach those phones which aren't assigned to
	> any partition or CSS.
	>       > When I change the partition, the result from a
	> debug q931 is
	>       > 'Unassigned/unallocated number' and I cannot
	> reach the phone.
	>       >
	>       > It is my first QSIG with MGCP and partitions so I
	> assume it's a
	>       > configuration issue related with partitions, but
	> I don't know where to
	>       > search...
	>       >
	>       > I have followed the Cisco doc " Cisco
	> Callmanager4.1-PBX
	>       > Interoperability Ericsson MD-110" with no luck...
	>       >
	>       > Thanks in advance;
	>       >
	>       >
	> Ruben_______________________________________________
	>       > cisco-voip mailing list
	>       > cisco-voip at puck.nether.net
	>       >
	> https://puck.nether.net/mailman/listinfo/cisco-voip
	>      
	>      
	>
	> > _______________________________________________
	> cisco-voip mailing list
	> cisco-voip at puck.nether.net
	> https://puck.nether.net/mailman/listinfo/cisco-voip
	>
	
	
	
	       
	               
	__________________________________
	Yahoo! Mail - PC Magazine Editors' Choice 2005
	http://mail.yahoo.com
	

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051130/d10699cd/attachment.html