[cisco-voip] Unit Port reconfiguration.

[ALI Rijas Mannanthara]

All these numbers the old and the new pilot numbers are registered to
the same CCM 3.3 , so for the phones its one hop ...still I have
route/trans pattern in the local ccm.

What I am wondering is Unity works with Portname prefix , it do not know
about the Voice mail port numbers we configure in round-robin.

When I delete the existing pilot number and add a new one ,still the old
pilot number takes me to Unity .

The new one just tells " connecting to voice mail and drops"

ALI Rijas
Systems-Network
EPBX-+91-44-22623880 Extn :6226
VoIP - 248-994-4858
Covansys India Pvt.Ltd
-----Original Message-----
From: Erick Bergquist [mailto:erickbe at yahoo.com] 
Sent: Thursday, October 06, 2005 8:35 AM
To: ALI Rijas Mannanthara; Carter, Bill; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Unit Port reconfiguration.


Check your route-patterns. You probably have a route
pattern with the original/old VM pilot # pointing to
the linegroup with the VM ports in it. You'll need to
change that route pattern number to match the new VM
Pilot # (or copy it and add another so the
route-pattern matches the VM Pilot #). Make sure the
partitions and CSSs allow for it to be called, etc.


--- ALI Rijas Mannanthara <RAli at covansys.com> wrote:

> I changed the voice mail pilot and the port numbers
> on CCM keeping the
> Voice mail prefix same . Ran the integration manager
> on Unity again   ,
> I am able to test the ports successfully . Still my
> new pilot number
> wont take me to the voice mail system.
> 
>  
> 
> And the old pilot number works fine , so I reverted
> back. Kindly advice
> 
>  
> 
> ALI Rijas
> 
> Systems-Network
> 
> EPBX-+91-44-22623880 Extn :6226
> 
> VoIP - 248-994-4858
> 
> Covansys India Pvt.Ltd
> 
> ________________________________
> 
> From: Carter, Bill [mailto:bcarter at sentinel.com] 
> Sent: Wednesday, October 05, 2005 10:24 PM
> To: ALI Rijas Mannanthara;
> cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Unit Port reconfiguration.
> 
>  
> 
> Rerun the voice-mail port configuration wizard with
> a new name
> (NewCiscoUM-). On Unity use the phone integration
> tool to change the
> name of the CallManager ports.
> 
> 	 
> 
> 	
> ________________________________
> 
> 
> 	From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On
> Behalf Of ALI Rijas
> Mannanthara
> 	Sent: Wednesday, October 05, 2005 7:56 AM
> 	To: cisco-voip at puck.nether.net
> 	Subject: [cisco-voip] Unit Port reconfiguration.
> 
> 	 
> 
> 	I have a unity 4.0 with 16 port integrated with
> Exchange 2003
> and ccm 3.3 . 
> 
> 	 
> 
> 	I need to change the voice mail ports configured on
> to a dummy
> extension as currently I am using DID's for Voice
> mail ports .
> 
> 	 
> 
> 	Do I have to reload the unity server after I change
> the Voice
> mail port config in CCM ? To take affect.
> 
> 	 
> 
> 	Kindly advice me on this...
> 
> 	 
> 
> 	 
> 
> 	ALI Rijas
> 
> 	Systems-Network
> 
> 	EPBX-+91-44-22623880 Extn :6226
> 
> 	VoIP - 248-994-4858
> 
> 	Covansys India Pvt.Ltd
> 
> 	 
> 
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



		
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com